Entrance Unit Inspiration
28 finishes to match any style.
From wood effect material to bold contemporary tones to choose from.
Furniture Data
Material
Material
18mm melamine-faced chipboard panels that incorporate 100% recycled wood content, making them both eco-conscious and resource-efficient. The core is produced under low-emission bonding standards—some variants even meet the lowest emission board (LEB) threshold, far exceeding stringent safety regulations.
Finish
The surface is coated with decorative paper impregnated with melamine resin, available in block colours and wood-look grains. Some finishes are further enhanced with matching textures to elevate both look and feel.
Quality
Our panels are built to last and produced with the highest care for both durability and sustainability. They’re certified for low emissions, ensuring a healthier home environment, and made from wood sourced through responsible forestry practices. Independent international awards also recognize their eco-friendly production and long-term performance, giving you peace of mind that your furniture is both reliable and responsibly made.
Dimensions and details
Material
Each part can be made between 15 cm and 79 cm in width, and up to seven parts can be placed side by side (from Part A to Part G), reaching a maximum total width of 553 cm. The top and bottom parts will always share the same width, and when parts are combined, a visible joint line will appear at the top.
Depth
Depth can be customised depending on the chosen base. When using sliders or a plinth, the depth of each part can be adjusted individually. However, when mounted on metal legs, all bottom parts must share the same depth. In either case, depth can range from 15 cm to 70 cm.
Colour
Vertical partition
Feet (adjustable)
Sliders are 6mm rubber feet that can be adjusted through a hole in the cabinet’s side panel using the allen key provided.
The plinth is of a 7cm height together with the 6mm adjustable sliders which can be adjusted through a hole in the cabinet’s side panel using the allen key provided.
The cylindrical metal legs measure 15 cm in height with a diameter of 2.5 cm and can be levelled by rotating the outer cylinder. When metal legs are used, they are attached to a bottom panel, which serves as the base for all assembled parts. Each part is then placed onto this panel. In addition to the legs positioned at the edges, extra legs are installed between each part to provide additional support and stability.
Wall mounting
Recessed back
This feature can be used to hide any sockets behind the product – the back panel is recessed 5cm from the carcass.
Handles / Push to open
Choose between our 5cm edge handle and the push-to-open mechanism. All doors and drawers come in a soft-closing system.
Horizontal partition vs. Internal shelving
Shelves are recessed 3cm inwards from the carcass while horizontal partitions are not recessed. Horizontal partitions are used to create new internal compartments whilst shelves allow doors to cover them. A horizontal panel can hold up to 25kg.
Shoe shelving
Shoe racks are wooden shelves inclined at a 75° angle and have a fixed depth space of 31.7cm providing ample space to fit your shoes. The minimum internal height required for a shoe shelf is 32cm and minimum depth of 41cm.
Cable access
A black cable port with a detachable cover. Its inner diameter is 5.5cm to be compatible with most of the plug and cable sizes
Cut outs
Cut outs are holes in the back panel of the part which would allow you to bring a plug socket forward or maybe place your meters within this cut out to hide it behind a door. The edges of the cut out will not be covered and the raw finish of the melamine will remain visible.
Clothes hanger
A 28-diameter steel rail and aluminium supports that can be fitted in any width and depth dimension. The internal minimum height required for a clothes hanger is 100cm.
Doors
Whether with a handle or push-to-open, doors come with a soft closing mechanism. Single doors are inserted at a height to width ratio of 1 : 1.2, for example, if the height is 50cm, the maximum possible width of a single door would be 60cm. As for double-doors the maximum height to width ratio is 1 : 2.4.
Drawers
Whether with a handle or push-to-open, drawers come with a soft closing mechanism. Drawers are only available when the compartment’s top panel does not exceed 120cm from the floor. Each drawer can hold up to 25kg.
Delivery and installation
Packaged delivery
The product will be delivered assembled in parts (from Part A to Part G). A general assembly guide is provided with the delivery to help you with the installation.
Inside your package
An instruction manual is provided the product including wall fasteners, and the screws and allen key required to assemble yor product. A personalised name tag is also provided to install on your furniture piece.
